Utilize the milling cutter for removing thick and soft materials such as: mastic, thermo-plastic, waterproofing membranes, cold plastic coatings, glues, etc... It leaves the surface smooth and ready for preparation. Often used to remove bulk of material prior to a carbide tip cutter.
Milling cutters will fit on the following scarifiers:
KR8 - KR10 - KR13 - TKO-2513
Milling Scarifier Cutters Available
Part No.
|
OD
|
ID
|
Thickness
|
Style
|
Routing / Crack Chasers |
||||
KRMC-363 Hub
|
3.63" |
1" |
.36" |
8 point |
KRMC 363 w/out Hub |
3.63" |
1" |
.36" |
8 point |
KRMC-484 Hub |
4.84" |
1" |
.36" |
8 point |
KRMC-484 w/out Hub |
4.84" |
1" |
.36" |
8 point |
KRMC-650 w/out Hub |
6.50" |
1" |
.36" |
8 point |
Milling Cutters |
||||
KRMC-401115 |
1.575" |
.591" |
.433" |
5 point |
KRMC-402215 |
1.575" |
.591" |
.866" |
5 point |
KRMC-552218 |
2.165" |
.709" |
.866" |
6 point |
KRMC-552225 |
2.165" |
.984" |
.866" |
6 point |
KRMC-802026 |
3.150" |
1.024" |
.787" |
6 point |
KRMC-802030 |
3.150" |
1.181" |
.787" |
6 point |
KRMC-803930 |
3.150" |
1.181" |
1.535" |
6 point |
KRMC-803926 |
3.150" |
1.024" |
1.535" |
6 point |